دتکتور گاز جدید، هوشمندترین آشکارساز گاز با به حداقل رساندن زمانی که اپراتورها باید در مناطق خطرناک بگذرانند، ایمنی را افزایش می دهد.
این فرستنده همه کاره و آشکارساز گاز دارای طیف وسیعی از ویژگیها است که از مهندسان و مدیران تأسیسات کارخانههای نفت، گاز، شیمیایی و پتروشیمی محافظت میکند.
مجهز به انواع حسگرها برای تشخیص گازهای قابل اشتعال، سمی، اکسیژن یا ثابت H2S.
رطوبت قابل تحمل دتکتور گاز سنج کروکن مدل XgardIQ تا ۹۵% می باشد.
این دتکتور کروکن (XgardIQ ) دارای گواهینامه های زیر می باشد.
ATEX and IECEx:
Ex II 2 G Ex db ia IIC T4 Gb (see above for temperature ranges)
دتکتور گاز کروکن XgardIQ دارای IP66 می باشد.
وزن دتکتور گاز کروکن ۴٫۱ کیلوگرم می باشد.
جنس بدنه دتکتور کروکن XgardIQ جنس بدنه ۳۱۶ فولاد ضد زنگ می باشد.
Overview
XgardIQ is an intelligent and versatile fixed detector and transmitter compatible with Crowcon’s full range of sensor technologies. Available fitted with a variety of sensors for fixed flammable, toxic, oxygen or H2S gas detection.
Providing analogue 4-20mA and RS-485 Modbus signals as standard, XgardIQ is optionally available with Alarm and Fault relays and HART communications. The 316 stainless steel are available with three M20 or ۱/۲“NPT cable entries.
(SIL-2) Safety integrity level 2 certified fixed detector.
Easy and safe to use
OLED Display – Bright, clear display indicates gas level and detector status even in dark locations
Non-Intrusive Calibration – Zero and calibration functions are performed via the display and keypad, without the need for a hot-work permit or any special tools (e.g. no magnetic wand required)
+Ve Safety Indicator – Confirms the detector is operating safely at a glance
Event Log Function – Stores all alarm, fault and maintenance events to provide a history of detector use
Remote Sensor – Improves probability of detection
Simple installation and maintenance
Universal Transmitter – Common transmitter for Crowcon’s full range of sensor technologies
Hot-Swap Sensor Modules – Sensors can easily be replaced using one hand without requiring tools or a hot-work permit
Auto-Sense Function – Automatically detects whether the control system is 4-20mA current sink or source and sets itself appropriately, eliminating the risk of being incorrectly set
Auto-Configure Function – Detects when a sensor module is plugged-in and uploads the appropriate gas type, range, units and alarm levels Reliability
Smart Bump And Speedy Bump Test Functions – Enable sensor health and response to be verified quickly and easily using test gas. Process is automated and provides a reminder when a bump test is due
Calibration Due Warning – Reminds the user when calibration is due to ensure that sensors remain operational and accurate at all times
Sensor Range Selection – User can set the full-scale range of the sensor via the display menu according to site or specific location requirements.
